Vendredi noir c'est maintenant

Le guide en 5 étapes pour porter correctement et confortablement une chemise

Posté le December 01 2017

Avant d'acheter une chemise, il est nécessaire de comprendre l'ajustement de chaque partie de la chemise pour assurer le confort et l'ajustement. En suivant ce guide, vous pourrez acheter des chemises parfaitement ajusté à vous, pour bien paraître, rester à l'aise et être parfaitement stylé.
Il s'agit d'un guide en 5 étapes pour vous assurer que vous portez vos chemises de manière professionnelle et appropriée tout en restant stylé et confortable.

  1. Coupe d'épaule

Lorsque vous regardez comment une chemise doit être correctement ajustée, vous pouvez d'abord regarder l'ajustement de l'épaule. L'ajustement de l'épaule d'une chemise ne doit pas être trop serré ou trop lâche. Cela étant dit, la couture de la chemise où le manchon rencontre le corps (se référer aux flèches dans l'illustration ci-dessus) devrait s'aligner directement là où votre épaule se termine, et où votre bras commence.

Un détail automatique de savoir si votre chemise est trop serré le long de l'épaule serait lorsque le tissu commence à se regrouper. En regardant la photo du milieu ci-dessus. Vous pouvez voir quand il y a de la tension dans le tissu et quand vous pouvez sentir la chemise être serrée le long de votre dos et de vos omoplates, c'est un fait indéniable que votre chemise est trop serrée autour de vos épaules.

Pour savoir si votre chemise est trop lâche autour des épaules, l'indicateur principal serait là où la couture tombe. Si la couture de l'épaule de la chemise tombe partout où l'épaule des individus rencontre leur bras, alors vous savez qu'il est trop grand ou trop lâche.

 

         2. Coupe du col

Lorsque vous portez une chemise, la façon dont le col s'adapte affecte  sérieusement  le look final, c'est sont un détail très importants à respecter. La meilleure façon de savoir si le col convient bien serait la règle des deux doigts. Comme montré sur l'image ci-dessus, vous voulez être en mesure d'avoir un peu de place entre votre cou et votre chemise, pour permettre la respirabilité et d'être confort.

Si vous achetez une chemise avec un col trop serré, ce sera très évident. Vous serez pas à l'aise, et cela reflétera directement l'esthétique finale et gâchera l'ensemble du look final de la tenue. En outre, oubliez de porter une cravate lorsque votre chemise est déjà trop serré pour commencer. Vous finirez par vous évanouir lors de la fête ou relâcher votre cravate avant même d'entrer dans la fonction.

Enfin, en regardant le col, vous ne voulez pas qu'il soit trop large non plus. Si vous êtes en mesure de voir l'intérieur de la chemise, et presque voir l'étiquette intérieure de la marque, vous savez que votre chemise est trop grande. Ne faites pas ces erreurs si vous voulez avoir l'air professionnel tout en restant élégant et confortable.

 

3. Longueur des manches

To know the proper length of your sleeve when purchasing men's dress shirts you need to stay relaxed. Everyone thinks the best way of checking if your sleeves are too short would be by raising ones hands to the sky and seeing if the shirt's sleeves are still lenghty enough. The problem with this is that, we never as humans go about our day like this. Sometimes while driving our arms will be at a 90 degree angle, but that is pretty well the only time of day we will have such tension in our arms.

With that being said, when you are trying a shirt on remember to stay calm and relaxed as if you were just hanging-out, talking to your co-workers about the party that happened the weekend before.

When it comes to length you want something that falls right at your hand, not too high, and not too loose that your hand is being hidden. You want the cuff of your sleeve to snug your wrist and stop right where your hand beings. 

 

         4. Sleeve Fit

This one is pretty comparable to shoulder fit (#1). Throughout this article, we are always looking for the middle ground. Not too tight and not too loose. A main indicator that your shirt is too tight when looking at sleeve fit would have to do with fabric tension. When you put on a shirt and you flex your arms, does it feel like your shirt is going to explode like The Hulk? If the answer is yes, then your shirt is obviously too tight for you. 

When your shirt is starting to have too much weight and the fabric is trying to overlap onto your cuff, that is when you know your dress shirt is too loose. You also want the shirt to drape and fit your body and in this case, to give your arms some definition.

5. Torso Fit

Okay, so we now know that if the fabric is bunching up, creasing or your having a hard time breathing in your shirt, it is definitely too small.

What we are going to concentrate on here when buying a dress shirt would be the fit under the arms and along the sides of your torso. A properly fitted shirt, that will ensure style and comfort will hug the waist, while not suffocating the person wearing the shirt. You want the dress shirt to hug under the arms and flow down the sides of your body like showed in the right image of the animation above. A shirt that is too loose will look more boxy, will flow over the waist, almost hiding ones belt, even though that wasn't the intended look.

What to gain from this article? Moderation is key. Don't try to wear a size down because you are thinking about what size shirt you wore last year, or 5 years before. Looking comfortable in your clothes is one of the most important factors when thinking of style and professionalism when wearing dress shirts. Also, don't try to be too comfortable. Even though you might love your dress shirt that is very comforable because it is loose fitting and breathable, this might not mean that is drapes your body and fits well.

Message us directly on our website or though e-mail if you need any guidance, style advice or proper size charts in relation to the brands we carry. We care about your style, so let us help you. 

 

Messages récents

Aimez-nous sur Facebook